Flying-Hobby
KBDD 450 PRO TAIL BLABES 61MM - MIDNIGHT BLACK
| Measures | 61mm length |
Flying-Hobby
T-REX 450 PRO/SPORT CNC CANOPY NUTS
| Included | Upper Metal Case x1 |
Specification:, - Destruction of Canopy Nut can be resolved forever.,
- Easier to install with threaded design. Lower Metal Case ...Flying-Hobby
CNC ANTI-ROTATION PIN - T-REX 450 PRO
Description:-,
Tail Gear Case Anti-Rotation is designed to replace stock plastic ...Flying-Hobby
RADIX 325MM MAIN ROTOR BLADES (T-REX 450 PRO)
,
Product Details The perfect addition to your small electric helicopter. ...Flying-Hobby
KBDD 450 PRO TAIL BLABES 61MM - NEON GREEN
| Measures | 61mm length |
Flying-Hobby
TAIL GEAR CASE ANTI-ROTATION PIN - T-REX 450 PRO
Description:-, Includes:, - CNC Aluminum Tail gear case anti-rotation, Features:*,
Tail Gear Case Anti-Rotation is designed to replace stock plastic ...Flying-Hobby
CC BEC PRO 20A 12S SWITCHING REGULATOR
| 1.69" (43mm) x 1.3" (33mm) x 0.94" (24mm) , Weight (w/o wires) | 1 oz (29 g) |
| Max Input | 12S LiPo (50.4V) |
| Max Output Current | 20 amps peak |
| Adjustable Output Voltage | 4.8V-12.5V |
| Max Continuous Current (Input Voltage/Max Continuous Output Current) | 16V/15A, 24V/13A, 32V/11A, 40V/9A, 48V / 8A |
Flying-Hobby
ALUMINUM TAIL BOOM SUPPORT BRACE (SILVER) - T-REX 450 PRO
Description:, -The CNC aluminum tail boom brace is designed to reduce vibration on the tail boom support rods. It is a one-piece design aluminum part and it holds the two tail support rods firmly with two cap screws, making it very strong and stand out., Includes:, -CNC Aluminum boom brace, Instruction:, -Place the tail boom support brace at about half way on the boom, Features:*,
-All screws included 100% Precision CNC machined Aluminum * Adding ...Flying-Hobby
Z-POWER B450ACE KV 4000 T-REX 450 SPORT/PRO
| *Weight | 55g |
| *Dia. | 30mm |
| *Length | 31mm |
| *Shaft Length | 14mm |
| *Shaft Dia. | 3.17mm |
| *Battery Cell | 3-4cell |
| *No Load | 2.26A |
| *Max Load | 25A |
| *KV | 4000 |
*Pole :6,
Flying-Hobby
Z-POWER 450GT OUTRUNNER (3.17MM) T-REX 450 SPORT/PRO
| *Weight | 55g |
| *Dia. | 27.7mm |
| *Length | 32mm |
| *Shaft Length | 15mm |
| *Shaft Dia. | 3.17mm |
| *Battery Cell | 3-4cell |
| *Max Load | 16.5A |
| *KV | 3800 |
| *Trust/g | 210W |
*No Load :2A,
Flying-Hobby
ALIGN 250/PRO DFC STAINLESS STEEL SCREW KIT
All RCScrewZ kits included:, , *General Screw Installation & Notes:, Use either a wax or grease on the threads to help prevent stripping while going into new or hard material. Some screws that are included in the our kits remain phillips heads but are still stainless steel. We have done this for strength,as a result of our fieldtesting, on small diameter screws (2mm and 2-56" dia). This may include some chassis screws and differential screws. All other remain socket head. Please refer to your assembly manual for screw locations. Does not include any machined collared screws or screw pins (pins with threads on the end), ** General Metric Conversion Screw Installation & Notes:, When converting from standard threads to metric thread.....metal parts must be re-tapped for metric threads. All wheels nuts will remain standard thread in our kits for axles.,
RCScrewZ Stainless Screw Kits are 100% complete. Your new kit ...